BEKA BA314E, Manual

Page: 19 / 58

Display Summary of function
LoC clr
Local reset
Contains sub-menu with two
functions enabling the run-time
display and grand total run-time to be
reset to zero via the front panel push
buttons when the Tachometer is in the
display mode.
See section 6.14
clr tot
When ‘on’ is selected, operating
the
&
and
*
buttons
simultaneously for more than three
seconds in the display mode
resets the run-time display to zero.
See section 6.15
clr gtot
When
on
is selected, operating the
)
and
*
buttons simultaneously
for more than 10 seconds in the
display mode resets the run-time
grand total to zero.
See section 6.16
Display Summary of function
CLr Gtot
Resets grand total run-time to
zero.
This function resets the grand total
run-time to zero from within the
configuration menu when
CLr YE5
is
selected, and
5urE
is entered to
confirm the instruction.
Note : Once reset, the original grand
total can not be recovered.
See section 6.17
CodE
Security code
Defines a four digit alphanumeric
code that must be entered to gain
access to the configuration menu.
Default code
0000
disables the
security function and allows
unrestricted access to all
configuration functions.
See section 6.18
r5Et deF Reset to factory defaults
Returns the Tachometer to the
factory defaults shown in section 6.0
To prevent accidental use the
request must be confirmed by
entering
5urE
before the reset will
be executed.
See section 6.19
19