BEKA BA314E, Manual

Page: 2 / 58

1. Description
2. Operation
2.1 Initialisation
2.2 Controls
2.3 Displays
3. Intrinsic Safety Certification
3.1 ATEX gas certification
3.2 Zones, gas groups & T rating
3.3 Power supply
3.4 Pulse input terminals
3.4.1 sensors that do not require energising.
3.4.2 sensors that require energising
3.5 Remote reset terminals
3.6 Certification label information
4. System Design for Hazardous Areas
4.1 Use with Zener barriers
4.1.1 Power supply
4.1.2 Pulse input
4.1.3 Switch contact input
4.1.4 Open Collector input
4.1.5 2-wire proximity detector input
4.1.6 Magnetic pick-off input
4.1.7 Voltage pulse input
4.1.8 Remote reset
4.2 Use with galvanic isolators
4.2.1 Power supply
4.2.2 Pulse input
4.2.3 Switch contact input
4.2.4 Open collector
4.2.5 2-wire proximity detector input
4.2.6 Magnetic pick-off input
4.2.7 Voltage pulse input
4.2.8 Remote reset
5. Installation
5.1 Location
5.2 Installation procedure
5.3 EMC
5.4 Units of measurement and tag marking on
scale card.
6. Configuration and Calibration
6.1 Calibration structure
6.2 Accessing configuration functions
6.3 Summary of configuration functions
6.4 Input:
inPut
6.5 Input type:
inP . tYPE
6.6 Debounce:
dEbouncE
6.7 Display update interval:
uPdAtE
6.8 Run-time display:
di5P-2
6.9 Position of the decimal points:
dP
6.10 Speed scale factor:
5CALE . 5
6.11 Timebase:
t-bA5E
6.12 Display filter:
FiLtEr
6.13 Clip-off:
CLP oFF
6.14 Local reset:
LoC clr
6.15 Local run-time reset:
clr tot
6.16 Local grand total run-time reset:
clr gtot
6.17 Grand total run-time reset from within the
configuration menu:
Clr . Gtot
6.18 Security code:
CodE
6.19 Reset configuration to factory defaults:
r5Et def
6.20 Pulse output
6.20.1 Intrinsic safety
6.20.2 System designing
6.20.3 Configuration
6.20.4 Access Pulse output sub-menu
6.20.5 Enable pulse output
6.20.6 Source of output pulse
6.20.7 Divide output pulse frequency
6.20.8 Define output pulse width
6.20.9 Pulse storage
7. Configuration example
7.1 Configuration procedure
8. Maintenance
8.1 Fault finding during commissioning
8.2 Fault finding after commissioning
8.3 Servicing
8.4 Routine maintenance
8.5 Guarantee
8.6 Customer comments
2222222222222222222
CONTENTS
The BA314G and BA314E are CE marked to show compliance with the European Explosive Atmospheres
Directive 2014/34/EU and the European EMC Directive 2014/30/EU