Copyright © 2017 TTAAll Rights Reserved.
Appendix Implication of indicator light
36
bind completed. Re-Power on the copter , it means bind successfully after you hear
broadcast
【
Communication connected
】
.
5.2.6 Charging
1) Open the battery cover from the controller, take out the battery..
2) Press the button on the controller charger into “6S Ni-MH”, combine the battery case
and charger by wire.
3) Plug the charger into the power outlet, meanwhile the charger's LED indicator is red,
in charging process, if the charger LED lights go out, indicating that the charging has
been completed.
Note:
If not using remote controller for long time, be sure to remove the batteries out of the
battery box, to avoid battery leakage.
5.2.7Antenna placement direction
In regular working situation, while the user hold the controller up side up, please be sure
to keep the antenna vertical to the ground.
5.3 Function Control
5.3.1 Flight Mode
Flight
mode
Instruction
Operate
Condition
attention
Altitude
mode
Horizontal
stabilization,yaw
locked,fixed
altitude
By transmitter
GPS satellite enough,
LED does not flash
red
GPS mode
Fixed horizontal
point,yaw
locked,fixed
altitude
Transmitter
operation/empty
tank reaction/others
GPS satellites
enough,LED does not
flash red
AB mode
Copter will fly and
spray along with
AB point
Record point A and
B and switch to AB
mode,choose left or
right for roll
GPS satellites
enough, LED does
not flash red
