Copyright © 2017 TTAAll Rights Reserved.
Appendix Implication of indicator light
29
flash normally if successful, LED will keep red for 3 seconds if fails and recalibration
should be done.
4) Please power again after successful calibration.
Attention
：
1) Compass should be done after changing flying area.
2) Calibration should be done in outdoor,wild and far away from high tension line tower
which is easy influenced by magnetic interference.
3) Keep horizontal and vertical during the slow calibration.
4)
Clockwise
is the only direction.
5.1.5 Sensitivity Settings
5.1.5.1 Basic Sensitivity
Basic sensitivity means copter sensitivity of roll and pitch.
It could be adjusted between
0% to 1000%
, default is 60%, 60%, 100%. The bigger the value, the sensitive and the fast
respond speed, and
jitter
is easy to get; the smaller the value, the less stable and slow
reaction.
5.1.5.2 Control Sensitivity
Control sensitivity is used to adjust respond speed,
range is from 0% to 500%
,default is
60%, 60%,100% ,the bigger the value, the fast of response, too big value will lead to
