Copyright © 2017 TTAAll Rights Reserved.
Appendix Implication of indicator light
30
stiffness
and too small value will lead to soft response. It’s suggested to use big control
sensitivity in small frame and small sensitivity in big frame to get a better flight experience.
The initial value is 100%, it’s suggested to change 10% every time to get a good feeling.
Attention:
1) Sensitivity adjustment should be 0%-10% every time, it’s not stable if change too
much.
2) Basic sensitivity is prior to control sensitivity,bigger value means more fierce
reaction,smaller value means slow reaction.
5.1.5.3 Other Parameters
Factory default value: brake coefficient :5.00 max speed:6m/s
damping:3m/s
Max angle:25degree
route speed:6m/s
back height: 20m
5.1.6 Low Voltage Protection
5.1.6.1 Settings of Low Voltage Protection
There are three reactions could be chosen for the low voltage protection:automatic
return ,automatic land, led display, LED+BACK+ClOSE (pump). Users can set it according
to real demands.The default value is automatic land.
