Beijing Rongda science & Technology RD-FH8C7 Manual Download Page 5

Page: 5 / 43

Chapter 1: Overview

The printing paper width of RD-FH8C7 THERMAL PRINTER is 58mm. Equipped with a

cutter, and supports the full cutting or half cutting function. The series printer increases

sheet metal casing on the basis of the W series, which is more convenient to install for

customers. The printer uses fully enclosed large paper warehouse design, which can

effectively prevent rain and dust from entering.

This series take into account unattended printing capabilities, and in order to prevent

inadvertent phenomenon, the paper and key functions are placed inside the printer. Only

when the panel is opened, the printer can change paper and do the button operation.

Meanwhile, also equip with a safety lock on the printer panel, after the lock to the printer's

front panel will not be opened, and at this time only the professional staff with the key can

open the front panel.

The series printers have two models:

RD-FH8C7-P

and

RD- FH8C7-S

. The former is a

26-pin standard parallel printer; and the latter is 5-pin RS232 serial interface printer. The

series printer has the printing paper width, high speed, small size and other characteristics.

They are used in the Bank Queue, supermarkets lockers, game consoles, subway

coupons and other equipments.

Summary of Contents for RD-FH8C7












































Search results

Summary of Contents for RD-FH8C7

Reviews:

Related manuals for RD-FH8C7

Brands by name

Popular brands

Beijing Rongda science & Technology RD-FH8C7, Manual

Search results

Summary of Contents for RD-FH8C7

Reviews:

Related manuals for RD-FH8C7

Brands by name

Popular brands