GB
Double Sound Speed Controller SFR-1-HL
88
BEIER-Electronic
01.04.2021
Adjustments of driving sound with the driving sound diagram
With the driving sound diagram you can set:
•
The neutral position of your joy sticks.
•
The beginning and end thresholds including the corresponding sound for each
driving sound (FG1 – FG5).
Explanation of the Diagram
The diagram consists of two axes:
1. The horizontal axe (x - left to right) shows the driving speed of the model
(respectively the position of the throttle stick).
2. The vertical axe (y - from down to up) shows the play-back speed of the
driving sound. The range starts at 60% and goes up to 300 %. This
percent refers to the play-back speed of the driving sounds (100 %) saved
in the SFR-1-HL slots. A higher play-back speed (e.g. 150 %) equals a
higher engine speed.
Explanation of the different coloured lines and quadrates in the diagram
Green line
The green line indicates the neutral position of the throttle stick. Using the blue setup
button/function the neutral position of the throttle channel is set automatically. As
long as the thorottle channel is in the neutral position, the module idles and the SFR-
1-HL plays the idle noise.
Red lines
The red lines on the outside left and right represent the maximal driving speed
(backwards and forwards). The other red lines with small red quadrates at the bottom
indicate the driving speed at which the driving sound/gear should be changed.
