GB
Double Sound Speed Controller SFR-1-HL
01.04.2021
BEIER-Electronic
35
Some of the latest remote controls include a “
software nautic module
”, such as
Multikanal (multichannel) by Graupner. In most of these cases, all switches are
transferred by one channel and no additional hardware switch module is necessary.
Please refer to the operating instructions supplied with your transmitter for further
details.
To each switch position different functions can be assigned in the Sound-Teacher
(see page 67). If the memory function is active, the function is switched on or off
when the switch is operated, and remains in that state until the switch is in the same
position a second time.
With correctly received data from the switch module, the blue LED on the SFR-1-HL
always flashes at regular intervals.
Exception: At EMS modules, the LED flashes only as long as a switch is triggered.
If the blue LED is not flashing regularly, or in case the nautic switches do not work at
all, please check the settings at your transmitter. If you are unsure about this, please
read the operating instructions supplied with your transmitter, as they generally
provide information on the settings required for Nautic modules (e.g. servo travel at
maximum).
In our BEIER-Electronic forum (FAQ), you will find a step by step guide in German
for troubleshooting:
Hilfe, mein Nautic-/Multiswitchmodul funktioniert nicht
https://www.beier-electronic.de/modellbau/forum/viewtopic.php?f=8&t=744
If you you are using a Jeti Duplex 2.4GHz, the “output period” of the receiver must be
set on “byTransmitter” by the Jeti-Box. Other important setting: ATV High Limit: 2,20
ms, ATV Low Limit: 0,80 ms.
Sum signals S-BUS, SUMD/SUMD3 and i-BUS
With the SFR-1-HL it is possible to evaluate the sum signals „S-BUS“,
„SUMD/SUMD3“ and „i-BUS“ of the receiver.
Up to 16 proportional channels can
be transmittet via only one connection from the receiver to the SFR-1-HL.
In
order to use sum signals, the receiver must be suitable for sum signals. In the radio
an activation might be necessay.
Using the sum signal up to 16 fully functional proportional channels, instead of 6, can
be used to control functions.
The sum signal output of the receiver is connected to
„Prop #8“ (X2/8)
at the
SFR-1-HL.
The blue LED flashes at regular intervals with correct sum signals.
