2
DIGITAL REVERB DR600
(8)
The two 1/4" TS connectors
OUT A
and
OUT
B
send the signal to
your amp. Use both connectors if you want to achieve full stereo
effect. For mono use just plug in OUT A.
Use the
DC IN
connection to plug in a 9 V power supply (not included).
The
BATTERY COMPARTMENT
is located underneath the pedal cover.
To install or replace the 9 V battery (not included), press the hinges with
a ballpoint pen and remove the pedal cover. Be careful not to scratch
the unit.
◊
◊
The DR600 has no on/off switch. As soon as you insert the
jack into the IN connector, the DR600 begins running.
When not using the DR600, remove the jack from the IN
connector. This extends the life of the battery.
The
SERIAL NUMBER
is located at the bottom.
2. Safety Instructions
Do not use near water, or install near heat sources. Use only authorized
attachments/accessories. Do not service product yourself. Contact our
qualified servicing personnel for servicing or repairs, especially when
power supply cord or plug is damaged.
3. Limited Warranty
For the applicable warranty terms and conditions and additional
information regarding Music Tribe’s Limited Warranty, please see
complete details online at musictribe.com/warranty.
Summary of Contents for DIGITAL REVERB DR600
Page 24: ......
