PF1352 USER MANUAL REV A 12/21/15
Figure 6-17 shows the Trigger Control tab, which controls the
TRIGger
subsystem. This
tab allows the user to set up a trigger event, initiate the
TRIGger
subsystem, and trigger
the event.
Figure 6-17 Trigger Control Tab
To enter the trigger event points, the user must first set the trigger mode to either List or
Step and click the
Submit Trigger Parameters
button. Up to ten event points separated
by commas may be entered in the textbox when the mode is set to List, and only one
point can be entered in the textbox when the mode is set to Step. The power supply will
ignore any additional points or characters entered.
