PF1352 USER MANUAL REV A 12/21/15
The measurements displayed in the
Output
section are not updated while the trigger
state is not in IDLE, in order to preserve dwell time consistency. Attempting to control
the output while the trigger state is not in IDLE will add the error
+212, “Command
Ignored LIST in Progress”
to the error queue. Click the
Abort Trigger
button to force the
trigger state to
IDLE
; this button will not affect the
INITiate:CONTinuous
state. Figure 6-
16 shows the System Control Tab while the trigger state is not in IDLE.
Figure 6-16 System Control Tab while Sweeping
