PF1352 USER MANUAL REV A 12/21/15
6.3.3 TRIGGER TAB
Figure 6-5 shows the Trigger Tab, which contains the main SCPI commands used for
setting up the
TRIGger
subsystem.
Figure 6-5 Trigger Tab
More information regarding the
TRIGger
subsystem can be found in the programming
manual for the power supply.
Steps for setting up a trigger event:
•
Set Trigger Source: select BUS or IMMediate and click the
Set
button. Use the
Get
button to query the trigger source and display the response.
o
BUS trigger source will wait for *TRG bus trigger or TRIG command to enter the
Sweeping state.
