Bego VARSEO S Basic, Translation Of The Original Operating Instructions

Page: 40 / 52

36
86
08
7 B
A
-en
/0
2
English VARSEO S
en
Service and Maintenance
Cleaning
If necessary, clean the machine on the outside with
a dry or slightly moist cloth and non-aggressive
detergent.
Cleaning the VARSEO S cartridge
1. First sieve the resin contained in the cartridge
and fill it into the corresponding resin bottle. Do
this by using a suitable funnel and place the
recommended screen on to it.
2. Clean the cartridge from any residual resin
using ethanol and towels.
3. Check the non-stick film and the glass plate for
any contamination and signs of damage
(
→ page 40).
4. As soon as VARSEO S cartridge is from any
resin residue, clean it again with paper towels
and ethanol and allow it to dry.
DANGER
Danger due to electric shock
Switch the device off and disconnect it
from the power supply before carrying
out any service or maintenance work!
WARNING
Risk of injury
The resin is light sensitive and can
cause allergic reactions.
• Observe the safety data sheet for
the resin in use
(
→
http://www.bego.com).
• Observe the operating instructions.
• Wear protective gloves. Recom-
mendation: Nitrile gloves.
• Use protective eyewear (safety
glasses).
• Wear protective clothing.
• Protect from direct light / sun light.
WARNING
Risk of injury
Ethanol is highly flammable.
• Keep the container closed tightly.
• Keep away from sources of ignition
– No smoking.
• Observe the safety instructions on
the packaging.
CAUTION
Property damage
Do not use any chemical and
aggressive cleaning agents, as they
may damage the finish of the unit.
NOTE
It is recommended to use a separate VARSEO S
cartridge for every resin.