Bego VARSEO S Basic, Translation Of The Original Operating Instructions

Page: 9 / 52

English VARSEO S
5
86
08
7 B
A
-en
/0
2
en
Warranty and Liability
Our "General terms and conditions of sale and
delivery" apply. These terms and conditions are
available to the operator since the conclusion of the
contract at the latest. Warranty and liability claims
for personal injury and property damage are
excluded if these are attributable to one or more of
the following causes:
•
Improper use of the device;
• Improper installation, commissioning, operating
and maintenance of the device;
• Operating the device with safety installa-
tions/safeguards that are defective, improperly
installed or inoperable;
• Failure to observe the notes contained in these
operating instructions regarding the transport,
storage, installation, commissioning, operation,
service and maintenance of this device;
• Unauthorized structural modifications to this
device;
• Inadequate monitoring/inspection of device
parts that are subject to wear;
• Improperly performed repairs;
• Disastrous situations/emergencies caused by
foreign objects or force majeure.
Intended use
This 3-D printer is solely designed for the
manufacture of medical technical objects.
The use of the device for any other purpose such as,
for example, the production of weapons or other
dangerous objects, as well as to produce objects
that are protected by copyright is strictly prohibited.
Any use deviating from the specified use is deemed
improper use and is strictly prohibited.
Prohibited are:
•
the use of the device if it is not in perfect condi-
tion or in case of safety-relevant device mal-
functions,
• any operation without protective covers or pro-
tective equipment/safeguards,
• working with the device without wearing protec-
tive clothing,
• unauthorized modification on the machine,
• the assignment of unqualified personnel.
The manufacturer has no knowledge of any
improper use up to this time.
Exclusion of liability in case of modifications
If a modification by the user affects any aspect of the
performance data or intended functioning, as
described in the relevant standards of the 3-D
printer, the person or organization that undertook the modification is responsible for obtaining a new
classification and new labelling for the 3-D printer.
This person or organization then assumes the
status of "manufacturer".
Exclusion of liability for the CAMbridge dongle
The owner is liable for the loss of the CAMbridge
dongle