Bego VARSEO S Basic, Translation Of The Original Operating Instructions

Page: 14 / 52

10
86
08
7 B
A
-en
/0
2
English VARSEO S
en
Device description
VARSEO S - compact 3D printer with user-friendly operating and control concept
The device allows the printing of a number of dental
3-D objects using proven materials along with state-
of-the-art Stereolithography Technology. This
technology works with the principle of printing the
object layer by layer using liquid resin and UV light.
During the development of the device special dental
technical requirements with regard to accuracy and
practicality were paramount.
1 Lever
2 Emergency release of the cover using the lug
3 Touchscreen
4 Front USB socket
5 Main switch
6 Glass pane in the device
7 LAN socket (rear of device)
8 VARSEO S cartridge
9 USB socket (rear of device)
The unique container concept allows quick change
of the printing material and makes pre-cleaning and
removal of the object from the stamp for the resin
receptor. Additionally the resin remains protected
from damaging light due to the innovative container
concept and therefore any artificial aging is
reduced. The exposure unit is equipped with a
powerful UV-LED. It ensures a rapid print and is
maintenance-free and durable.
Data between the device and the PC is exchanged
conveniently either via the network interface (LAN or
WLAN) or the USB interface. The wide range of
accessories facilitate immediate use. The technical
design and the implementation of the most modern
technology allows the 3-D printer to be used
optimally in the laboratory as a piece of working
equipment.
The BEGO VARSEO S has a user-friendly touch-
screen, which is used to control all operations.
However, the device can also be operated via a web
browser from the workstation PC. If the print job (job
file) is loaded from a USB flash-drive, then this can
be done with the front USB socket. Alternatively, the
job file may also be send to the machine via the local
network. To that end, the device must be connected
to the local network and the device software must be
set up accordingly.
The Varseo S is available in two different editions
(Partner edition / Basic edition); see details on
page 13 "Varseo S Services". In order to activate the
BEGO Varseo S 3D printer, the printer as well as the
material to be used must first be registered under
www.my.BEGO.com (see page 16). After the regis-
tration, you will be able to see and keep track of your
system and your registered products, get access to
software updates and be able to manage optional
materials.