Bego VARSEO S Basic, Translation Of The Original Operating Instructions

Page: 31 / 52

English VARSEO S
27
86
08
7 B
A
-en
/0
2
en
Selecting a print job
1. Job name
2. Number of layers with currently printed layer
3. Resin used
4. RFID chip number
5. Remaining time in bego-yellow or expected
total print time in bego-gray
6. Progress bar
Files can be send to the printer via the supplied USB
flash drive, with CAMbridge via the network or via
the "Varseo S Service Board".
1. In the print menu, all print jobs available on the
USB flash drive and on the network are listed
and can be chosen. Select the correct print job
(illustration see page 26)!
It is also possible to preview the selected print
job or to display a detailed "layer view" (illustra-
tion on the left)
2. A print job can be aborted by pressing the
"abort print" button and confirming the subse-
quent prompt in the print menu.
3. If a print job is loaded and the corresponding
resin bottle is inserted, the device will display
the following information (illustration on the
left)
4. Pressing the "Print" button will start the print.
Automatic firmware update
Do not switch the device off during an update.
The printer will restart after an update.
1
2
3
4
5
6
NOTE
Please note that the VARSEO S printer must be
online and registered on www.my.BEGO.com in
order to execute print jobs!
Setup see page 16 ff.
NOTE
The VARSEO S will automatically update the
device software to the latest firmware version via
my.BEGO. The Varseo S checks for new versions
to be installed every time it is restarted and after
every print job.