BEFCO TILL-RITE T60-266, Operator'S Manual

Page: 12 / 52

23. Inspect the entire machine periodically
3
. Look for loose fasteners, worn or broken
parts, and leaky or loose fittings.
24. Use only the driveline supplied with the equipment. Do not use it if it is missing any
shield or safety protection.
25. Pass diagonally through sharp dips and avoid sharp drops to prevent “hanging up”
tractor and implement.
26. Avoid sudden starts and stops while traveling up or downhill.
27. Always use down slopes; never across the face. Avoid operation on steep slopes.
Slow down on sharp turns and slopes to prevent tipping and/or loss of control.
3.02 - Setup and Lubrication
Notice to the dealer: Pre-delivery setup and service including lubrication is the
responsibility of the dealer. It is up to him to assure that the machine is in perfect
condition and ready to be used. It is his responsibility to ensure that the customer is
aware of all safety aspects and operational procedures for the tiller. He must also fill out
the Pre-Delivery Checklist
4
prior to delivering the tiller.
CAUTION: Stand clear of bands when cutting as they could be under sufficient
tension to cause them to fly loose. Take care in removing bands and wire, they
often have extremely sharp edges and cut very easily.
O
PERATION
12
BEFCO
T
ILL
-R
ITE
T60 O
PERATOR
’
S
M
ANUAL
4
See Chapter 7 - Pre-Delivery Checklist.
3
See Chapter 4 - Maintenance.
1
2
3
4
5
1. 3 point connecting bolt
2. top hitch support arm bolt
3. top hitch arm bolt
4. grease fitting
5. right rotor support
Fig. 3