BEFCO TILL-RITE T60-266, Operator'S Manual

Page: 15 / 52

3.03 - Side-Shift
The side-shift capability gives the tiller numerous advantages over center mounted
tillers. It can till next to shrubs, sidewalks or buildings. Smaller sizes can cover wider
tractor tire tracks.
To side-shift the tiller from the center mount position, do the following:
1. Loosen the 8 nuts
(#1, fig. 8) holding the locking clamps to the front and rear of the
gearbox housing. Do not remove the nuts.
2. Push the sliding frame (#2, fig. 8) towards the left to its new desired position. This
can be done without levers or turnbuckles. Do not shift it right of center.
3. Re-tighten the 8 nuts.
O
PERATION
15
BEFCO
T
ILL
-R
ITE
T60 O
PERATOR
’
S
M
ANUAL
Fig. 7
1. rear shield
2. adjustment chain
3. 'U' bolt
4. chain hitch
5. sliding frame
6. gearbox
1
2
3
4
5
6
1
1
3
2
Fig. 8
1. nuts holding the locking clamps
2. sliding frame
3. main tiller frame