BEFCO TILL-RITE T60-266, Operator'S Manual

Page: 22 / 52

12. Making sure proper attire is worn. Avoiding loose fitting clothing which can become
entangled. Wearing sturdy, tough-soled work shoes and protective equipment for
eyes, hands, ears and head. Never operate tractor or implements in bare feet,
sandals or sneakers.
13. Checking area for stones, branches and other debris that might be thrown.
14. Ensuring proper lighting is available, sunlight or good artificial lighting.
DANGER: Never operate without all shields on the machine and securely in place.
The tiller blades can throw objects which could result in personal or property
damage.
Enter new areas carefully.
CAUTION: For emergency reasons, learn how to stop the tractor and implement
quickly. Always disengage the PTO, lock parking brake, stop engine and allow the
blades to come to a complete stop before dismounting the tractor.
WARNING: Do not allow the tractor rpm to go below full throttle when working.
This can cause damage to your tractor.
3.09 - Test Run
After running the tiller 120 to 150 feet, raise the machine and just as the blades lift up
from the soil, disengage the
PTO,
lower the tiller and shut off the tractor engine. Assure
that the machine is properly adjusted and functioning properly. After the first five
minutes of operation, stop and feel the gearbox. It should be warm to the touch but not
hot.
3.10 - Working Depth
Tilling depth is determined largely by the condition of the ground. When working on hard
or on previously unworked ground, set maximum depth at 2” to 3”. Greater depth may
require a second pass.
NOTE: Excessive vibration or jumping of the machine is an indication that the
machine is working too deep for conditions, such as in hard, parched or
compacted soil and should be adjusted accordingly.
O
PERATION
22
BEFCO
T
ILL
-R
ITE
T60 O
PERATOR
’
S
M
ANUAL