Beem M23.001, User Manual

Page: 22 / 68

20
Pasta-FiXX EN
BEEM - Elements of Lifestyle
Appliance description
(See illustration on the left fold-out page)
Motor unit 1
Spindle socket 2
Lid recess 3
Kneading switch position 4
Extrude switch position 5
Switch A 6
Switch B 7
Screw cap 8
Extruder screw 9
Centring ring 10
Drive spindle 11
Extruder screw housing 12
Kneading unit 13
Adapter ring 14
Pasta dough container 15
Lid 16
Macaroni attachment 17
Spaghetti attachment 18
Linguine attachment 19
Tagliatelle attachment 20
Small measuring cup 21
Large measuring cup 22
Conical filling shaft 23
Shortbread attachment 24
User manual (not illustrated) 25
Switch positions
Level Function
Appliance switched on:
Kneading mode
0
Appliance switched off.
Appliance switched on:
Dough extruding mode
Safety switches
The appliance is equipped with two safety
switches and can only be operated when
the pasta dough container (16) and the lid
(17) are correctly fitted on the motor unit.
WARNING
Before using each time, check the ►
function of the safety switch. Switch
on the appliance without attached
container or lid for this purpose. If
the motor turns, the safety switch is
defective and the appliance may not
be used.
Operation and use
(See illustration on the right fold-out page)
Assembly (image A1)
Push the pasta dough container (15)
‹
onto the motor unit (1).
Push the centring ring (10) onto the
‹
drive spindle (11) (image A2) and
insert the extruder screw (9) into the
extruder screw housing (12).
Push the kneading unit (13) onto the
‹
drive spindle(11).
Push the adapter ring (14) onto the
‹
drive spindle (11) (image A3) so that
the adapter ring is flush with the
kneading unit (13).
Insert the drive spindle with all at-
‹
tached parts into the pasta dough
container (15) so that the end of the
drive spindle (11) fits into the spindle
socket (2) of the drive unit (1).