Beem M23.001, User Manual

Page: 21 / 68

19
EN Pasta-FiXX
BEEM - Elements of Lifestyle
Electrical connection
For safe and trouble-free operation of the
appliance, the following instructions must
be observed for the electrical connection:
Before connecting the appliance, ■
compare the connection data (voltage
and frequency) on the rating plate with
those of your mains power supply. This
data must correspond in order to avoid
damage to the appliance. If in doubt,
ask your electrical appliance retailer.
The mains socket must be protected
■
by at least a 10 A automatic circuit
breaker.
Ensure that the mains lead is undam-
■
aged and is not laid over sharp edges.
The mains cable must not pulled
■
tightly, bent or come into contact with
hot surfaces.
Route the cable to prevent risk of trip-
■
ping.
The electrical safety of the appliance
■
is only assured when it is connected
to a properly installed protective earth
(PE) conductor system. Connection to
a mains socket without PE conductor
is forbidden. If in doubt, the electrical
system must be checked by a qualified
electrician. The manufacturer assumes
no liability for injury or damage caused
by a missing or interrupted protective
earth conductor.
Startup
Unpacking
Remove the appliance, all accessory
‹
parts and the user manual from the
box.
Remove all packaging materials and
‹
protective foils from the product and
the accessories before using it for the
first time.
NOTE
Do not remove the rating plate or ►
any warning signs on the appliance.
Keep the original packaging during
►
the warranty or guarantee period in
order to return the appliance in the
packaging in the event of a warranty
or guarantee claim. Transport dam-
age will invalidate the warranty or
guarantee.
Check the delivery contents
Check for visible signs of damage or
‹
missing items.
Report incomplete or damaged con-
‹
tents to your supplier immediately.
Before using for the first time
Clean the appliance and the acces-
‹
sories as described in the section
Cleaning and care .
NOTE
When using for the first time, it is ►
possible that production-related
additives such as grease could
cause slight odour or smoke. This is
completely normal. Ensure sufficient
ventilation.