EN
30
Handling and Operation
Operating Elements
The device has the following operating elements:
Operating element
Function
Rotary knob (
3
)
Select a program
Button
(
4
)
Con
fi
rm (setting the time)
Start / end process
Switch to time display
Buttons
and
(
5
)
Increase or reduce value (by 1 in each case)
Tare
button (
9
)
Set scale to “0” (Tare function)
•
Each program features an LED light which indicates that it has been selected. You can turn
the rotary knob to switch between the different programs.
•
To change the values faster, the
and
buttons can be held down.
•
If the carafe (
8
) is removed from the main device (
13
) while water is being dispensed, this dis-
pensing is stopped automatically. If the carafe is placed back into the main device within around
30 seconds, the dispensing of water is resumed. If this is not done, the process is aborted.
Time
As soon as the mains plug is plugged into a plug socket, the display (
2
)
fl
ashes three times with
all indications lit up. A beep then sounds and the time display “00:00”
fl
ashes up. The clock has
a 24-hour time format.
1. Use
the and
buttons (
5
) to set the hours.
2. Press
the button (
4
) to switch to the minutes.
3. Use
the and
buttons to set the minutes.
4. Press
the button to con
fi
rm the set time. The device switches to
Brew Mode A / M
and
“0 g” is shown on the display.
The time is saved until a new time is set or the device has been disconnected from the
mains power supply.
5. To change the set time, turn the rotary knob (
3
) to the
Program
position (preset time).
6. Hold down the
button for around 3 seconds. The time indicator
fl
ashes on the display.
7. Perform steps 1 – 3.
8. Press
the button to con
fi
rm the changed time.
