USER MANUAL FOR BEEM OUTDOORS, LLC. 20KW
SILENT STANDBY GENERATOR SET
16
5. Fuse:
Function
:
The fuse has been pre-set to protect the generator set from short circuiting
from inside or outside. When the fuse encounters any incorrect electrical operations, the
fuse will burn out to protect the electrical circuits.
Use
:
To access or change, twist the fuse cover with the appropriate size Phillips head
screwdriver counter-clockwise and remove the internal fuse. Check whether the fuse has
is burned out. If burned out, replace the fuse and re-insert into the fuse opening and
secure by twisting the fuse cover clockwise.
6. Emergency stop switch
Function
:
The photo above is of the
Emergency Stop Switch
and is located on the
front face of the generator unit. When depressed, all generator control systems will
immediately shut down, including the engine and generator head. This
Emergency
Stop Switch
should be depressed should any unexpected emergencies occur.
Depressing this button can help minimize dangerous occurrences to persons, pets,
property, plants, or to the generator unit itself.
Use
:
When an emergency occurs, immediately press the
Emergency Stop Switch
. The
unit will immediately stop running. Once the switch has been depressed and the
emergency has passed, to re-start the generator unit, rotate clockwise 90 ° to pop up
into the normal operational position.
Ⅲ
. Preparations before 1
st
Use
Before the 1
st
use of the generator unit, check all generators systems for proper
installation and visual working conditions, including the fuel lines and connections,
engine condition, control panel, environmental conditions, and safety measures.
Before first use, you must run through the systems of the generator one by one to