USER MANUAL FOR BEEM OUTDOORS, LLC. 20KW
SILENT STANDBY GENERATOR SET
15
Function
：
The circuit breaker controls the ON/OFF functions of the generators electrical
power output. When this switch is in the up (ON) position, the electrical power output will
be produced normally. When this switch is placed in the down (OFF) position, electrical
power output will be broken, or turned off. However, as a safety function, when
this switch is placed in the ON position, the production of a too large of an electrical load
or a short circuit due to faulty operation, the switch will immediately and automatically
switch to the OFF position in order to protect the generator from damage. Should this
occur, turn off the generator unit and correct the cause before restarting and placing the
circuit breaker in the ON position again.
Use
：
When starting manually, always start the generator before placing the circuit
breaker in the ON position. Likewise, when operating manually, place the circuit
breaker in the OFF position before shutting the generator down.
3. Power switch
：
Function
：
The power switch controls the entire generator set control system. If this
switch is placed in the OFF (O pushed in down mode) position, the internal electrical
control circuit of the unit will not have any electrical power. When this switch is placed in
the ON (I in the up mode) position, the control system can be started, tested and run.
4. Fuel switch
：
Function
：
The fuel switch allows the fuel to flow to the engine when placed in the ON (I is
in the up mode) position. Likewise, the switch turns the flow of fuel off to the engine when
placed in the OFF (O pushed down) position.
