Bedrock SM30 Operating Manual Download Page 77

Page: 77 / 101

Bedrock SMxx operating manual

Settings module

Set system clock
First adjust the date and time; then tap this button to confirm

Calibrate touch screen
Tap this button to initiate touch calibration procedure

Quick STIPA / STIPA pro module

Qualification label U-A
as defined in IEC-60268-16 (derived directly from STI)

STI shown includes the effect of “additive noise” according to
the noise spectrum entered in the “additve noise” menu

Adjust graph scale up / down

SPL meter module

Overload indicator

Underrange indicator

Set time and frequency weightings. Settings keyboard appears
upon tapping this button

RTA meter module

Move cursor through frequency bands. Tap left to move to lower
frequencies, right to move to higher frequencies.

FFT module

Zoom controls, which appear if the magnifying glass icon on
the chart is pressed. Zoom in (+) or out (-), and center around
the current cursor position. Tap “hide” to collapse.

Summary of Contents for SM30






































































































Search results

Summary of Contents for SM30

Reviews:

Bedrock SM30, Operating Manual, Page: 77 / 101

Search results

Summary of Contents for SM30

Reviews: