manualshive.com logo in svg

Bedrock SM30, Operating Manual, Page: 74 / 101

Share
Download
Bedrock SM30 Operating Manual Download Page 74

 

    74 

 

 

 

 

 

Bedrock SMxx operating manual 

      

 

     © Bedrock Audio BV,  2019 

 

 

 

    

Malfunctions that are found to result from any of the above conditions are not covered by 
warranty. Repairs will take place only at the expense of the owner. If claimed under war-
ranty, an examination fee may be charged and transportation costs will be charged to the 
owner.

Please do not attempt to open your Bedrock SMxx yourself, as there are no user-serviceable 
parts inside. If you do see a legitimate need to open the device yourself, please contact war-
ranty@bedrock-audio first, so we can discuss preserving your warranty rights. Please be 
aware that the product is protected by tamper-proof seals.

A worldwide pick-up&return service is included in the warranty. This means that we will 
have the defective unit picked up at your location at no charge, provided that it is presented 
in its original equipment case, packed in a cardboard box with suitable cushioning mate-
rial.

Summary of Contents for SM30






































































































Reviews:

No comments