Beckman Coulter Microfuge 20 Series, Instructions For Use Manual

Page: 27 / 74

B30162AA 1-7
Description
Name Rating Plate
1
•
The actual (real-time) operating conditions of the centrifuge are displayed during the run, after
START
is pressed.
NOTE
The Error Message Chart also appear on the displays, when applicable. The centrifuge emits a series
of audible tones to alert the user to an error condition.
Figure 1.5 Digital Display showing all possible displays, Microfuge 20R shown
Name Rating Plate
The name rating plate is affixed to the rear of the centrifuge. Check that the line voltage agrees with
the voltage listed on this name rating plate before connecting the centrifuge. Always mention the
serial number and the model number shown when corresponding with Beckman Coulter regarding
your centrifuge.
Table 1.1 Display Definitions
Display Description
Soft-Stop/Start Off Acceleration and Deceleration settings.
Short Run Displays while the Quick Run button (Microfuge 20 only) is pressed or when the
Start button is pressed and held (Microfuge 20R only).
Prog Displays to show the saved program number.
Set Displayed when the speed, run time or temperature is being set.
Actual Displayed to show the actual speed, run time and temperature.
Speed/RCF Displays the speed in either RPMs or RCF (
´
g)
Time Displays the time to be set for the run or the actual time while running.
Temperature Displays the temperature to be set for the run or the actual temperature while
running (Microfuge 20R only)
Rotor code Code 1 : Not used
Code 2 : FA241.5
Code 3 : FA241.5P
Code 4 : FA4x8.2P
Code 5 : FA361.5
Code 6 : Not used