4-6
Troubleshooting
Figure 4-1. Manual Door Release
Action
Result
3. Lower the panel as far as the
tether cords allow.
!
CAUTION
Do not attempt to remove tether cords. They
are required to assure safe operation of the
centrifuge.
4. Use the latch override key
(368247) to turn the right-
hand latch bolt to the right
(clockwise) and the left-hand
latch bolt to the left (counter-
clockwise) until the latches
release.
If the rotor is still spinning, close the door and turn the latches to
secure it. Wait until the rotor stops spinning to repeat this step.
!
WARNING
NEVER try to slow or stop the rotor by hand.
5. After removing the rotor,
replace the top front panel by
pushing it into place.
TM
Hex Wrench
Hex Wrench
Latch
Override
Key
