Beckhoff EP3204, Documentation

Page: 71 / 92

Commissioning/Configuration
EP3204 and EP3314 71 Version: 2.2
Index 8000: TC Settings Ch.1
Index (hex) Name Meaning Data type Flags Default
8000:0 TC Settings Ch.1 Maximum subindex UINT8 RO 0x1B (27
dec
)
8000:01 Enable user scale Activates user scaling BOOLEAN RW 0x00 (0
dec
)
8000:02 Presentation Presentation of the measured value BIT3 RW 0x00 (0
dec
)
0 Signed, in two's complement
1 Most significant bit as sign
2 High-resolution (1/100 °C steps)
8000:05 Siemens bits The S5 bits are displayed in the three low-order bits BOOLEAN RW 0x00 (0
dec
)
8000:06 Enable filter Enable filter, which makes PLC-cycle-synchronous data
exchange unnecessary BOOLEAN RW 0x00 (0
dec
)
8000:07 Enable limit 1 Activates limit check for limit 1 BOOLEAN RW 0x00 (0
dec
)
8000:08 Enable limit 2 Activates limit check for limit 2 BOOLEAN RW 0x00 (0
dec
)
8000:0A Enable user calibra-
tion Activates user calibration BOOLEAN RW 0x00 (0
dec
)
8000:0B Enable vendor cali-
bration Activates vendor calibration BOOLEAN RW 0x01 (1
dec
)
8000:0C Cold junction com-
pensation Cold junction compensation BIT2 RW 0x00 (0
dec
)
0 Cold junction compensation takes place via the
PT-1000 in the plug connector.
1 Cold junction compensation is not active.
2 Cold junction compensation takes place via the
process data.
3 Same as value 0.
8000:0E Swap limit bits Swaps the two limit bits, in order to achieve compatibility
with older hardware versions. BOOLEAN RW 0x00 (0
dec
)
8000:11 User scale offset User scaling: Offset INT16 RW 0x0000 (0
dec
)
8000:12 User scale gain User scaling: Gain INT32 RW 0x00010000
(65536
dec
)
8000:13 Limit 1 Value for limit 1 INT16 RW 0x0000 (0
dec
)
8000:14 Limit 2 Value for limit 2 INT16 RW 0x0000 (0
dec
)
8000:15 Filter settings Filter settings (Ch1. applies to all channels) UINT16 RW 0x0000 (0
dec
)
0 50 Hz
1 60 Hz
2 100 Hz
3 500 Hz
4 1 kHz,
5 2 kHz
6 3.75 kHz
7 7.5 kHz
8 15 kHz
9 30 kHz
10 5 Hz
11 10 Hz
8000:16 Calibration interval reserved UINT16 RW 0x0000 (0
dec
)
8000:17 User calibration offset User calibration: Offset INT16 RW 0x0000 (0
dec
)
8000:18 User calibration gain User calibration: Gain UINT16 RW 0x4000
(16384
dec
)