Beckhoff EP3204, Documentation

Page: 70 / 92

Commissioning/Configuration
EP3204 and EP3314 70 Version: 2.2
6.6 EP3314 - object description and parameterization
EtherCAT XML Device Description
The display matches that of the CoE objects from the EtherCAT XML Device Description. We rec-
ommend downloading the latest XML file from the download area of the Beckhoff website and in-
stalling it according to installation instructions.
Parameterization via the CoE list (CAN over EtherCAT)
The EtherCAT device is parameterized via the CoE - Online tab (double-click on the respective ob-
ject) or via the Process Data tab (allocation of PDOs).
Introduction
The CoE overview contains objects for different intended applications:
• Objects required for parameterization during commissioning
• Objects intended for regular operation [
}
76] , e.g. through ADS access
• Objects for indicating internal settings [ } 70] (may be fixed)
• Further profile-specific objects [
}
83] indicating inputs, outputs and status information
The following section first describes the objects required for normal operation, followed by a complete
overview of missing objects.
6.6.1 Objects to be parameterized during commissioning
Index 1011: Restore default parameters
Index (hex) Name Meaning Data type Flags Default
1011:0 Restore default pa-
rameters Restore default parameters UINT8 RO 0x01 (1
dec
)
1011:01 SubIndex 001 If this object is set to " 0x64616F6C" in the set value dia-
log, all backup objects are reset to their delivery state.
UINT32 RW 0x00000000
(0
dec
)