manualshive.com logo in svg

Beckhoff EJ6910, Operation Manual

Share
Download
Beckhoff EJ6910 Operation Manual Download Page 51

Operation

EJ6910

51

Version: 1.7.0

Fig. 61: SAL worksheet and variable mapping in online mode

On each function block the current FB state is shown as text and in the form of an icon. The different states
are listed in the FB documentation. The following table describes the icons.

FB Icon

Description

FB State: RUN
In RUN state no error is present, and the output of the FB is set.

FB State: SAFE
In SAFE state no error is present, and the output of the FB is NOT set.

FB State: ERROR/STOP
In ERROR/STOP state an FB error is present or the FB is still in STOP state. This is the
case if the group has not yet been started.

In addition, the online display can be extended by displaying analog and digital values. To this end the
function can be enabled or disabled by selecting 

Show Online Values

 from the context menu in the SAL

worksheet.

Summary of Contents for EJ6910















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands