Beckhoff CX8010 Manual Download Page 19

Page: 19 / 100

Product overview

CX8030 / CX8031

Version: 1.6

4.5

CX80xx - MicroSD cards

CAUTION

MicroSD card as ignition source in potentially explosive atmospheres

Gases or dusts can be ignited by a spark discharge when the MicroSD card is inserted or
removed.

Switch off the power supply and wait until the 1-second UPS has discharged. Ensure that
there is no explosive atmosphere before you insert or remove the MicroSD card.

In the basic version the CX80xx contains a MicroSD card with 512 MB. You can order it as an option with
larger cards (up to 8 GB).

The cards employed are SLC memory with extended temperature range for industrial applications. Use
exclusively MicroSD cards approved by Beckhoff.

Example of a MicroSD card:

Order identifier

Capacity

Description

CX1900-0123

1 GB

MicroSD card (SLC memory) with
extended temperature range for
industrial applications instead of
the 512 MB card (ordering option)

CX1900-0125

2 GB

CX1900-0127

4 GB

CX1900-0129

8 GB

Order identifier

Capacity

Description

CX1900-0122

512 MB

MicroSD card (SLC memory) with
extended temperature range for
industrial applications as spare
part.

CX1900-0124

1 GB

CX1900-0126

2 GB

CX1900-0128

4 GB

CX1900-0130

8 GB

Further Information:

http://www.beckhoff.de/CX8000

Summary of Contents for CX8010





































































































Search results

Summary of Contents for CX8010

Reviews:

Related manuals for CX8010

Brands by name

Popular brands

Beckhoff CX8010, Manual

Search results

Summary of Contents for CX8010

Reviews:

Related manuals for CX8010

Brands by name

Popular brands