Beckhoff CU8130-0240, Manual

Page: 39 / 57

Configuration
CU8130-0240 39 Version: 1.1
bError : This output is set if an error occurred when executing the function.
nErrId : Supplies the ADS error number or the command-specific error code (table) when the bError output is
set.
Error Codes Error description
0x0000 No error
0x8001 UPS configuration error. It is possible that the UPS is
not configured correctly or that no UPS is configured
at all.
0x8002 Communication error. Communication with the UPS
was interrupted.
0x8003 Error during the reading of the status data.
stStatus : Structure with the status information of the UPS (type: ST_UPSStatus [ } 40] ).
Not every UPS device can supply all the status information. Some devices, for example, cannot supply the
BatteryLifeTime or BatteryReplace status.
Example:
Online data with status information of a UPS:
Requirements
Development en-
vironment Target platform UPS hardware PLC libraries to be
integrated (cate-
gory group)
TwinCAT v3.1.0 PC or CX (x86, x64, ARM) • Beckhoff BAPI v1;
• Beckhoff P24Vxxxx;
• Beckhoff CP903x card (PCI/ISA);
Tc2_IoFunctions
(IO)