Beckhoff CP29 Series, Manual

Page: 15 / 45

Product overview
CP29xx 15 Version: 3.1
3.2.5 DVI Extended input
The CP29xx-0000 Control Panel has a DVI Extended input (X106). It is used to transmit the graphics signal
from the Industrial PC to the Control Panel.
The graphics signal is transferred directly via a DVI cable over a distance of 50 m max. Such a cable length
leads to strong distortion of the graphics signal on arrival at the Control Panel. A signal processor is used in
the Control Panel to fully restore the DVI signal. The Industrial PC requires a conventional DVI output.
1 8
16
24 17
9
X106
Fig. 7: CP29xx_DVI Extended input pin numbering
Table 6: DVI Extended interface pin assignment
Pin Connection Pin Connection Pin Connection
1 TDMS Data 2 - 9 TDMS Data 1 - 17 TDMS Data 0 -
2 TDMS Data 2 + 10 TDMS Data 1 + 18 TDMS Data 0 +
3 TDMS Data 2/4 Shield 11 TDMS Data 1/3 Shield 19 TDMS Data 0/5 Shield
4 TDMS Data 4 - 12 TDMS Data 3 - 20 TDMS Data 5 -
5 TDMS Data 4 + 13 TDMS Data 3 + 21 TDMS Data 5 +
6 DDC Clock 14 + 5V Power 22 TDMS Clock Shield
7 DDC Data 15 Ground (+ 5 V, Analog H/V
Sync) 23 TDMS Clock +
8 Analog Vertical Sync 16 Hot Plug Detect 24 TDMA Clock -
C5 GND