Beckhoff CP29 Series, Manual

Page: 21 / 45

Product overview
CP29xx 21 Version: 3.1
3.4 Optional USB interface
The CP29xx can be extended beyond the basic configuration with an additional USB interface. The following
ordering options are available:
• USB (order identifier: C9900-E268)
The ordering option is only available for the CP29xx without push button extension. The interface is mounted
ex works. It is located at the bottom right at the front of the Control Panel behind a cover. To access the
interface follow the steps below, as shown in Figure 14:
1. Press against the curved section on the right side of the cover (section A).
ð The cover protrudes slightly from the left side of the device (section B).
2. Turn the cover downwards (section C).
ð
The USB interface is now accessible (section D).
A B
C D
Fig. 14: CP29xx_access optional interface
3. Turn the cover back again.
4. Press the curved section again.
ð
The cover is locked again.
The interface is used to connect peripheral devices with USB connection. It is a USB-A socket according to
IP65. The supported USB specification depends on the product variant. The following table assigns the
specifications to the product variants:
Table 10: USB specification assignment
Product variant USB specification
CP29xx-0000 USB 3.0
CP29xx-0010 USB 2.0
1 2 3 4
5 6 7 8 9
Fig. 15: CP29xx_optional USB interface