Mechanical installation
Version: 1.0
───
67
eXtended Transport System
Completion of the assembly
► Screw all screws in the machine bed tight
► Observe tightening torques:
Components
Tightening torque [Nm]
Screws, M5 x 20
8
► Screw all screws on the guide rails of the entire system tight
► Observe tightening torques:
Components
Tightening torque [Nm]
Screws, M4 x 45
6
► Screw all screws on the electrical interfaces of the entire system
tight
► Observe tightening torques:
Components
Tightening torque [Nm]
Screws, M4 x 12
3
1
► Cut off the overhanging part of the seal 1 flush to the rail with a
cutting tool
A scalpel or a hobby knife, for example, is a suitable cutting tool.
► a scalpel or hobby knife
► Cut all further seals to length in the same way
