Beckhoff AM8000 Series, Operation Instructions Manual

Page: 18 / 123

Product overview
18 ─── Version: 4.3 AM8000 and AM8500
3.2
Type key
AM8 t u v-w x y z-0 00 0 Explanation
AM8 Product line
Synchronous servomotors
t Motor series
0 = standard
5 = increased mass moment of inertia
u Flange size
1 = 40 mm
2 = 58 mm
3 = 72 mm
4 = 87 mm
5 = 104 mm
6 = 142 mm
7 = 194 mm
v Overall length
1, 2, 3, 4
w Shaft version
0 = smooth shaft
1 = shaft with groove and feather key according to DIN 6885
2 = shaft with radial shaft-sealing ring IP 65 and smooth shaft
3 = shaft with radial shaft-sealing ring IP 65, groove, feather key
4 = shaft with radial shaft-sealing ring IP 65, smooth shaft and
sealing air connection
5 = shaft with radial shaft-sealing ring IP 65, groove, feather key and sealing
air connection
x Winding type
A … Z
S = special winding
y Feedback system
0 = resolver, two-pole
1 = OCT single-turn
2 = OCT multi-turn
3 = Hiperface single-turn 128 SinCos from F6
4 = Hiperface multi-turn 128 SinCos from F6
A = OCT single-turn 23-bit
B = OCT multi-turn 23-bit
G = OCT single-turn 24-bit, SIL 2
H = OCT multi-turn 24-bit, SIL 2
N = no feedback, "sensorless"
z Holding brake
0 = no holding brake
1 = 24 V holding brake
A = 24 V fan from F5; no holding brake
B = 24 V fan from F5; 24 V holding brake
0 Versions
0 = standard
1 = special version
9 = in case of AM805x, AM855x and AM802x, flange compatible with AM3x5x
and AM312x
00 Not defined
0 Connection
0 = rotatable angular connector or terminal box