Beckhoff AM8000 Series Operation Instructions Manual Download Page 15 | Manualshive

Page: 15 / 123

background image

For your safety

Version: 4.3

───

15

AM8000 and AM8500

2.2.2

During operation

Avoid contact with DC link DC+ and DC-

Measure the voltage on the DC link test contacts DC+ und DC-. Ob-
serve the following delay times after disconnecting from the mains
supply:

• AX5101 to AX5125 and AX520x

5 minutes

• AX5140, AX5160 and AX5172

15 minutes

• AX5190 and AX5191

30 minutes

• AX81x8, AX8206 and AX8810

30 minutes

• AX8620 to AX8640

30 minutes

• AX5192 and AX5193

45 minutes

Do not work on live electrical parts

Do not open the motor while it is live. Ensure that the protective con-
ductor is connected properly. Never loosen electrical connections
when live. Only work on the motor when the voltage has dropped to
< 50 V. Disconnect all components from the mains and secure them
against being switched on again.

Do not touch hot surfaces

Check the cooling of the surfaces with a thermometer. Do not touch
the components during and after operation. Allow the components to
cool down for at least 15 minutes after switching off.

Avoid overheating

Operate the motor according to the technical specifications. Please
refer to chapter: "Technical data". Activate and monitor the tempera-
ture contact of the motor. Provide for sufficient cooling. Switch the
components off immediately if the temperature is too high.

Do not touch any moving or rotating components

Do not touch any moving or rotating parts during operation. Fasten
all parts or components on the machine or plant.

2.2.3

After operation

De-energize and switch off components before working on
them

Check the functionality of all safety-relevant devices. Carry out a
voltage test. Secure the working environment and the control cabi-
net against being switched on again. See chapter: Decommissioning

«
...
13
14
15
16
17
...
»

Summary of Contents for AM8000 Series




























































































































Reviews:

No comments

Related manuals for AM8000 Series

950-1020 MOTOR KIT 8504048 REV 2 1297

Brand: TJERNLUND Pages: 2

Brand: Bosch Pages: 106

rexroth MSK 030

Brand: Bosch Pages: 72

Rexroth MKE Series

Brand: Bosch Pages: 134

Brand: Bosch Pages: 82

Brand: Bosch Pages: 124

Rexroth MKE E Series

Brand: Bosch Pages: 138

Brand: Daewoo Pages: 188

Brand: Viessmann Pages: 14

Brand: FPT Pages: 49

Brand: Crestron Pages: 2

Brand: Lombardini Pages: 64

11LD522-3 Series

Brand: Lombardini Pages: 44

Brand: Lombardini Pages: 58

Brand: Lombardini Pages: 68

Brand: Lombardini Pages: 109

Brand: Robin America Pages: 31

Rexroth Brueninghaus Hydromatik A2F/6.1 Series

Brand: Mannesmann Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands