35
GENERAL OPERATION
>>>
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
Transferring using the USB
port
The USB port is used to link the Traffic
Assist Pro directly to a personal computer.
The Microsoft® Active Sync program
must be installed for transmission. Micro-
soft® Active Sync is contained on the
DVD provided.
The link then involves several steps:
>
Switch off Traffic Assist Pro.
>
Link the Traffic Assist Pro and compu-
ter using the USB cable.
>
Switch on Traffic Assist Pro again (do
not press the screen after the unit is
switched on).
ActiveSync automatically sets up a link to
the Traffic Assist Pro.
Transferring maps
The installation software from the DVD
should be used for the transfer. This in-
volves the following stages:
>
switch off Traffic Assist Pro.
>
remove memory card and plug into an
SD card reading device or the use the
USB cable to connect the Traffic Assist
Pro to the computer.
>
boot up the computer and insert the
DVD.
>
use the installation program to transfer
the map required.
>
slide the memory card back into the
Traffic Assist Pro or correctly remove
the USB cable.
>
switch the Traffic Assist Pro back on.
The new map is available right away
Transmitting music tracks,
pictures and videos
Since the complete set of maps takes up al-
most all the space on the supplied memo-
ry card, you should store pictures, music
and videos on a separate memory card or
a USB storage medium (not included in
the scope of delivery).
The files can be transferred via a card read-
er or the USB connection.
Note:
Use obvious folder names because these
will help you later when you are trying to
find the file you want in the Traffic Assist
Pro.
Summary of Contents for Traffic Assist Pro Z 250
Page 1: ...Operating instructions ...
