Beck 14-100, Instruction Manual

Page: 54 / 92

54
80-1403-01, Rev. 3
Transducer Block Listing
Relative
Index
Record Name (if applicable):
Parameter Label
Use
1 ST_REV fieldbus use, no Beck use
2 TAG_DESC fieldbus use, no Beck use
3 STRATEGY fieldbus use, no Beck use
4 ALERT_KEY fieldbus use, no Beck use
5 MODE_BLK typically Auto or CASCADE
6 BLOCK_ERR fieldbus use
7 EVENT_UPDATE fieldbus use
8 BLOCK_ALM fieldbus use
9 TRANSDUCER_DIRECTORY fieldbus use
10 TRANSDUCER_TYPE fieldbus use
11 XD_ERROR fieldbus use
12 COLLECTION_DIRECTORY fieldbus use
13 Position % present actuator position
14 Position Unit unit of measure for Position %
15 Demand % present actuator Demand
16 Demand Unit unit of measure for Demand %
17 Op Mode Demand Operating Mode
18 Trq/Thr % present output shaft Torque load
19 Trq/Thr Unit not used in Group 14
20 Ambient Temp present DCM-3 temperature
21 Temp Unit unit of measure for Ambient temperature
22-1 Inhibits: EXT 2 Inhibitor not used in Group 14
22-2 Inhibits: EXT 1 Inhibitor reason motor is not extending output shaft
22-3 Inhibits: RET 2 Inhibitor not used in Group 14
22-4 Inhibits: RET 1 Inhibitor Reason motor is not retracting output shaft
22-5 Inhibits: LED Status
allows remote checking of which LED’s on the DCM-3 are
illuminated
22-6 Inhibits: Switch Status not used in Group 14
23-1 DCM BIST: Operating Status summary of process-related conditions
23-2 DCM BIST: BIST 1 built-in self-test results
23-3 DCM BIST: BIST 2 built-in self-test results
23-4 DCM BIST: BIST 3 built-in self-test results
23-5 DCM BIST: analog_output_fixed1 not used in Group 14
23-6 DCM BIST: Analog Sig Saturated analog signals are out of measurement range
24-1 SigDif: DemPosDiff Unit unit of measure for DemPosDiff
24-2 SigDif: DemPosDiff the difference between the Demand and the Position
25-1 Statistics: TotalRunTm total amount of time the motor has been powered
25-2 Statistics: OverTrqs/Thrusts not used in Group 14
25-3 Statistics: Peak Trq/Thr not used in Group 14
25-4 Statistics: Reversals
the total number of times the motor has started in the
direction opposite to the previous start
25-5 Statistics: Stalls the total number of times the stall timer has timed out
25-6 Statistics: Starts the total number of motor starts
25-7 Statistics: LastRun the duration of the last motor movement
25-8 Statistics: Set up OverTrqs/Thrusts not used in Group 14
25-9 Statistics: Set up OverTrqs/Thrusts not used in Group 14
FOUNDATION FIELDBUS
Transducer Block