BEAR | 2017 |
page 2
General safety:
Use only as specified in the operating instructions provided
The water distiller should not be used if it has encountered a physical shock or has been
dropped
The water distiller should not be moved or knocked while in operation
The water distiller must be stored and transported according to the package labels
After transport or storage allow the water distiller to warm up and dry out (2 hrs.) before
connecting to the power source
The water distiller is designed for indoor use only
Do not operate the water distiller in environments with aggressive or explosive chemical
mixtures
Do not make modifications to the design of the water distiller
Be careful, water distiller surfaces and distillate can be extremely hot while operating
Use only original accessories and parts (heaters, valves, control unit etc.), provided by
BEAR Innovation, LLC or its representatives
Electrical safety:
Connect only to the power source with a voltage and power frequency
corresponding to that one on the serial number label (ID-plate)
Ensure that the switch and/or plug are easily accessible during us
e
Do not plug the water distiller into the power source without grounding
Before moving / cleaning the water distiller turn it off and disconnect from the
power source
1. Safety
The following symbol mean:
CAUTION:
Read these operating instructions fully before use and follow
them unconditionally! Instructions are relevant to safety precautions.
