75.5916.03 LZR-WIDESCAN 20180821
Page 13 of 16
75.5916.03 LZR-WIDESCAN 20180821
Page 13 of 16
75.5916.03 LZR-WIDESCAN 20180821
Page 13 of 16
75.5916.03 LZR-WIDESCAN 20180821
Page 13 of 16
By default, all objects higher than the selected value will activate the Height Trigger. This function can also be
used to partially open the door depending on the height of the object.
The Height Trigger function can be used for a door control which has a partial-open input.
a. Assign Output 1, Output 2, or Relay to
Height
.
b. Connect to the Full-Open input on the door control.
c. Set the motion field to any object and assign the motion to an output.
d. Connect to the Partial-Open input of the door control.
The factory default for this parameter is 7’6
»
, but additional parameters are available by accessing the
«
Height
Limit
»
parameter in the
«
OTHERS
»
menu, via LCD only
–
customization of this parameter is unavailable via
remote control. Follow the LCD menu path to make changes:
MAIN
OTHERS
HEIGHT LIMIT
68.9, 78.7,
88.6
, 98.4, 108.3, 118.1, 127.9, 137.3, 157.5
(factory default is bold/underlined)
NOTE:
Each of these available parameters is
higher than
XX inches. I.e. If the parameter 108.4 is chosen, the
sensor will detect objects with a MINIMUM height of 108.4 inches.
The door opens partially.
(motion detection)
lower than 7’6
"
The door opens completely.
(presence detection)
higher than 7’6
"
HEIGHT TRIGGER
By default, all objects that move slower than the selected value will activate the output.
This function helps to trigger the door open in the case of late / slow-moving objects in close proximity to the
door, and is included in the Corridor presetting.
The factory default for this parameter is less than 3 mph, but additional parameters are available by accessing
the
«
Speed Limit
»
parameter in the
«
OTHERS
»
menu, via LCD only
–
customization of this parameter is
unavailable via remote control. Follow the LCD menu path to make changes:
MAIN
OTHERS
SPEED LIMIT
3.1
, 6.2, 9.3, 12.4, 15.5, 18.6, 21.7, 24.8, 28, 31,
(factory default is bold/underlined)
NOTE:
Each of these available parameters is
slower than
XX mph. I.e. If the parameter 15.5 is chosen, the
sensor will detect objects moving at speeds SLOWER than 15.5 mph.
SPEED TRIGGER
