BEA LZR-WIDESCAN, Manual

Page: 11 / 16

75.5916.03 LZR-WIDESCAN 20180821 Page 11 of 16 75.5916.03 LZR-WIDESCAN 20180821 Page 11 of 16
...
75.5916.03 LZR-WIDESCAN 20180821 Page 11 of 16 75.5916.03 LZR-WIDESCAN 20180821 Page 11 of 16
ANY
UNIDIRECTIONAL
UNI 100%
UNI REV
DEFAULT
UNI 100%+
Direction
MOTION
OPTIONAL REMOTE CONTROL SETTINGS (cont.)
When programming each of the parameters listed below (function,
logic, holdtime), you must always enter 3 digits for the given parameter
(output 1, output 2, relay).
1st digit = Output 1
2nd digit = Output 2
3rd digit = Relay
If you do not want to change the setting of an output, select 0.
First, assign the outputs.
Next, determine the desired states and hold times for each output chosen above.
FOR EXAMPLE, if you want the
outputs to be Motion (Output 1), Pull-
Cord (Output 2), and Safety (relay),
you must push the following buttons
in the following order:
Out 1 Function*
Out 1 Logic**
Out 1 Holdtime
Out 2 Function*
Out 2 Logic**
Out 2 Holdtime
Relay Function*
Relay Logic**
Relay Holdtime
motion
motion or
pull-cord
presence safety pull-cord
speed height
motion
pull-cord
safety
motion
pull-cord
presence
motion
motion or
pull-cord
presence safety pull-cord
speed
presence
+ height
motion
pull-cord
safety
motion
pull-cord
presence
motion
motion or
pull-cord
presence
NO
NO
passive
100 ms
100 ms
100 ms
NC
NC
active
safety pull-cord
speed height
motion
pull-cord
safety
motion
pull-cord
presence
** Output status during non-detection.
no change
no change
no change
1 s
1 s
1 s
3 s
3 s
3 s
5 s
5 s
5 s
10 s
10 s
10 s
30 s
30 s
30 s
1 min
1 min
1 min
5 min
5 min
5 min
10 min
10 min
10 min
20 min
20 min
20 min
1 ANY detection in any direction
2 UNI 100% (default)
unidirectional detection (approaching within the width of
the max. field)
6 UNI REV unidirectional detection reverse (going away)
7 UNI 100% +
unidirectional detection (approaching within the width of
max. field + 1 m of bidirectional detection in front of door)
9 UNIDIRECTIONAL
unidirectional detection (approaching in any direction;
distance between object and sensor decreases)