75.0127 V3 Jul. 2003 [Rev. 8/13/2004]
Page 5 of 17
BEA’S
UNIVERSAL
REMOTE
CONTROL
MECHANICAL
ADJUSTMENTS
PRESENCE
SENSING FIELD
1. Install the desired lens for the infrared curtain (presence), as shown below.
•
Narrow Lens is suitable for smaller door openings or high mounting height applications.
Narrow-field Lens
Wide-field Lens
[3’3” (W) X 13.75” (D)]
[6’ 6” (W) X 13.75” (D)]
2. The infrared presence pattern may be adjusted in two different ways:
•
First, the pattern may be adjusted nearer or farther from the door.
•
Second, the pattern width may be adjusted to suit the particular door application
3. The adjustment screw will bring the pattern nearer or farther from the face of the door by adjusting the
tilt angle from +4° to –4°. At the standard mounting height, one complete clockwise turn of the
adjustment screw will move the pattern approximately 3 inches closer to the door. The precise location
of the infrared beam may be found by using the BEA Spot-finder (PN: 10SPOT) after the Wizard has
been powered up.
•
Open the battery compartment at the
back of the remote control.
•
Insert 2 AAA batteries – observe polarity
•
Close battery compartment
DOOR
HEADER
-4
°
+4
°
Unlock
Number keys
Radar Sensitivity
Immunity
Radar Detection mode
Check Values
Output Configuration
Auto-learn time
Curtain Set-up Launch
Choice of Radar Mount Ht.
Default Value
Infrared sensitivity
Lock
- Key
+ Key
SMR
F1
Relay hold time
F2
IR Curtain
-4
+4
OBSOLETE
