38
5. Notwithstanding the provisions of Subsection (4) above, warranty services or
repairs must be provided at distribution centers that are franchised to service the
subject engine/equipment.
6. The owner must not be charged for diagnostic labor that leads to the determination
that a warranted part is in fact defective, provided that such diagnostic work is
performed at a warranty station.
7. Rato is liable for damages to other engine/equipment components proximately
caused by a failure under warranty of any warranted part.
8. Throughout the emissions control system’s warranty period set out in subsection
(b)(2), Rato must maintain a supply of warranted parts sufficient to meet the
expected demand for such parts and must obtain additional parts if that supply is
exhausted.
9. Manufacturer-approved replacement parts that do not increase the exhaust or
evaporative emissions of the engine or emissions control system must be used
in the performance of any warranty maintenance or repairs and must be provided
without charge to the owner. Such use will not reduce the warranty obligations of
Rato.
10.
Add-on or modified parts that are not exempted by the Air Resources Board
may not be used. The use of any non-exempted add-on or modified parts will be
grounds for disallowing a warranty claim. Rato will not be liable to warrant failures
of warranted parts caused by the use of a non-exempted add-on or modified part.
11. Rato issuing the warranty shall provide any documents that describe that warranty
procedures or policies within five working days of request by the Executive Officer.
D - Emission Warranty Parts List for Exhaust
1. Fuel Metering System
• Carburetor and internal parts (and/or pressure regulator or fuel injection system).
• Air/fuel ratio feedback and control system.
• Cold start enrichment system.
2. Air Induction System
• Controlled hot air intake system.
• Intake manifold.
•
Air filter.
3. Ignition System
• Spark Plugs.
• Magneto or electronic ignition system.
• Spark advance/retard system.
4. Exhaust Gas Recirculation (EGR) System
• EGR valve body, and carburetor spacer if applicable.
• EGR rate feedback and control system.
5. Air Injection System
• Air pump or pulse valve.
•
Valves affecting distribution of flow.
• Distribution manifold.
WARRANTY
