31
7.7 Fuel filter
1. Remove the screws (1), and then remove the cover (2), and drain the
fuel.
2. Hold and move up the clamp (4), then take off the hose (5) from the tank.
3. Take out the fuel filter.
4. Clean the filter.
5. Dry the filter and put it back into tank.
6. Install the hose and clamp, then open the fuel valve to check for leaks.
7. Install the cover and tighten the screws.
MAINTENANCE
- 31 -
6. Install the muffler screen and the muffler cap.
7. Install the cover and tighten the screws.
6.6 Fuel tank filter
Never use the gasoline while smoking or in the
vicinity of an open flame.
1. Remove the fuel tank cap and filter.
Fuel tank cap
2. Clean the filter with gasoline.
3. Wipe the filter and install it.
4. Install the fuel tank cap.
Be sure the fuel tank cap is tightened securely.
6.7 Fuel filter
1. Remove the screws
①,
and then remove the cover
②,
and drain the fuel
③
2. Hold and move up the clamp
④,
then take off the hose
⑤
from the tank.
②
1
3. Take out the fuel filter .
4. Clean the filter with gasoline
.
5. Dry the filter and put it bank into tank
.
6. Install the hose and clamp, then open the fuel valve to check whether it is
leak
.
7. Install the cover and tighten the screws.
8. STORAGE
Long term storage of your machine will require some preventive
procedures to guard against deterioration.
8.1 Drain the fuel
1. Turn the 3 in 1 switch to “OFF” (1) .
2. Remove the fuel tank cap and then
remove the filter. Extract the fuel from
the fuel tank into an approved gasoline
container. Then, reinstall the fuel tank cap.
WARNING
• Fuel is highly flammable and poisonous. Check “SAFETY
INFORMATION” (page 6) carefully.
NOTICE
• Immediately wipe off spilled fuel with a clean, dry, and soft cloth as
fuel may deteriorate painted surfaces or plastic parts.
3. Start the engine (See Page 19) and leave it running until it stops.
The engine stops in approx. 20 minutes by running out of fuel.
TIP:
Do not connect any electrical devices. (unloaded operation)
Duration of the running engine depends on the amount of the fuel left
in the tank.
4. Remove the screws, and then remove the cover.
5. Drain the fuel from the carburetor by loosening the drain screw on
