BCS Edge 480CT, Wave Quick Reference Manual

Page: 8 / 20

NOTE: Your SIP phone features may vary depending on the model and on how your Wave phone
system is set up.
Conf ( )
Establishes server based conference of up to four conferees.
Goodbye ( ) - also known as End Call on models 9112i and 9133i
Releases the current call the same as hanging up the handset.
Hold ( on 9112i & 9133i models / on 5000i models)
Icom ( on model 480i/480CT)
Performs a voice call to another extension.
Mute ( on 480i/480CT)
When your phone is muted, you can hear the caller but the caller cannot hear you.
Redial ( or softkey) Places a call to the last number you dialed.
Transfer ( or on 5000i models)
Places a call on hold while you dial and connect to the destination extension.
PHONE SETTINGS
1. Volume Adjustment - Use the # and - keys in the dial pad to adjust the volume of the handset,
speaker, and ringer.
2. Setting Options: To make changes to settings such as the display contrast, ringtone, headset
volume, etc. follow the procedure below.
1) Press Options
2) Follow the prompts that appear on the display (use the navigation keys as
described).
01 - Language
02 - Time and Date
03 - Set Ring Tone
04 - Clear Message Waiting
05 - Contrast Level
06 - Live Dialpad
07 - Headset Settings
08 - Network Settings
09 - SIP Settings
10 - Phone Status
ADDITIONAL FEATURES
1. Using Authorization Codes - You might be assigned an authorization code that gives you the
ability to make calls on restricted phone line keys. Authorization codes are used to override
access restrictions.
Dial a phone number, and listen for a long beep.
Enter your authorization code, and press #