8
Ovi-Scan
2.2.1 Tally menu
TALLY
RUN/TOT
ADD+CLEAR
NEG TALLY
Use the Remote Tally Box to keep a count of foetal lambs identified.
For 0, 1, 2 or 3 lambs press the corresponding number on the box.
For 4 lambs press 1 and 3 simultaneously.
To register as a ‘LATE’ press 0 and 1 simultaneously.
The total sheep and % lamb figures are automatically updated.
The Ovi-Scan stores the tally count even when it is switched off and power is removed. In addition to
displaying the running tally, a ‘TOTAL’ tally can be displayed. This function allows you to view combined
statistics, for instance if several flocks are being scanned for one customer.
To use this function the previous totals must be cleared before use.
Note: The Tally controller functions regardless of which menu is currently displayed.
A: Run/TOT
To toggle between running tally and total tally press soft key 2 (Run/TOT). When displaying total
tally, counting is not possible. Return to running tally to continue counting.
B: ADD+CLEAR
To reset the running tally and add it to the total, press soft key 3 (ADD+CLEAR). Before starting the
next flock, take a note of the running tally displayed.
C: nEG TALLY
To remove a tally entry if a mistake has been made, press soft key 4 (NEG TALLy) then press the value
that has to be removed on the tally box. Repeat these two steps for each item that has to be removed.
Pressing the (NEG TALLy) button again cancels the operation.
It is important to ensure that both running tally and total tally are both cleared for each customer
(see 2.2.7 for ‘CLEAR TALLY’ function).
Ovi-Scan manual v.3.indd 8
13/07/2012 16:44