manualshive.com logo in svg

BCF Technology Ovi-Scan, Instruction Manual, Page: 14 / 28

Share
Download
BCF Technology Ovi-Scan Instruction Manual Download Page 14

14

Ovi-Scan 

2.2.7 RFID menu

RFID

    

    

FLASH OFF

    

TALLY CLEAR

 

       

The RFID menu can be used to configure the Ovi-Scan so that tally data can be transferred to certain 
manufacturers’ RFID scanners via the ‘SERIAL DATA’ connector ‘P’.

B: FLASh On/OFF
Pressing soft key 3 will switch the flash on tally press on or off. If this option is on, then the greyscale 
bar on the display will flash whenever a button on the tally controller is pressed.

C: TALLY CLEAR
Pressing soft key 4 will clear the total tally stored in the Ovi-Scan.

2.2.8 Modes menu

MODES

    

OVI-STORE

    

DUO-STORE 1

    

RF CHAN 3

   

 
The ‘MODES’ menu is used to store the default settings for the system in both Ovi-Scan and Duo-Scan 
modes.

A: OvI-STORE
Pressing soft key 2 will store the current depth, frequency, gain and power settings as well as the scan 
orientation, direction settings, brightness & contrast and all foetal aging indicators.

B: DuO-STORE
Pressing soft key 3 will store the current depth, frequency, gain and power settings as well as the 
scan orientation, direction settings and all foetal aging indicators for use in Duo-Scan mode. Up to 8 
different settings may be stored.

Each time the button is pressed, a new Duo-Scan mode is stored, once the limit of 8 is reached, the 
scanner needs to be switched off and on to start again from mode 1.

The displayed value (i.e. ‘DUO-STORE1’) shows which mode will be stored when the button is pressed.

C: RF ChAn 3
Pressing soft key 4 changes the RF channel that the Duo-Scan transmits on.

Ovi-Scan manual v.3.indd   14

13/07/2012   16:44

Summary of Contents for Ovi-Scan





























Reviews:

No comments