17
5 Duo-Scan option
The scan module can be removed from the Ovi-Scan console and used with other accessories as a
highly portable scanner (Duo-Scan).
The Duo-Scan accessories allow the ultrasound image to be viewed on display headset, or remote
monitor options, with the module housed in a wipedown case mounted in a backpack with a battery.
Displays are connected to the ‘DISPLAy’ connector ‘H’.
When operating as Duo-Scan the ultrasound image can be viewed on BUG BCF Universal Goggles and
on the Easi-Scan Remote Display monitor.
The battery clips onto the rear of the module.
The standard probe and portable display are connected to the front panel of the module.
When powered from a battery, the unit is switched on by front panel power button.
When used as a Duo-Scan, a number of modes may be stepped through using soft key 1, ‘MODE’. No
system or tally information is displayed on screen, only the greyscale bar and ultrasound image are
displayed.
In Duo-Scan mode, a battery capacity and voltage reading are displayed in the lower corners of the
display. The menu disappears after approximately 7 seconds, leaving only the scan, voltage and battery
capacity displayed.
5.1 Mode control
All possible modes are stepped through by pressing soft key 1 ‘MODE’.
The default modes may be changed whilst the Duo-Scan module is in the console (see 2.2.8).
Before inserting the module in the Ovi-Scan console, ensure that the power is off, and slide gently
home. If some resistance is met, ensure that the module is the right way up and that the latches are
open. Once the module is fully home, both latches should be closed.
MODE 1
POWER
↓
↑
GAIN
Pressing soft key 1 will cycle through all available modes, for each mode, the range and frequency will
be displayed briefly on the screen.
Pressing soft key 2 will alternate between power and gain and soft keys 3 and 4 are used to adjust the
selected value.
Ovi-Scan manual v.3.indd 17
13/07/2012 16:44